Stäng

Produkter

Guides & Inspiration

Stäng

Varukorg

Tanner Chucka

DDD £0
Tanner Chukka is a classic 1-layer workboot from the Heritage Collection, with a strong Lundhags character.
Läs mer

Produkten placeras i varukorgen

Vi beklager men den valgte varianten finnes ikke på lager

local_shipping
Free shipping over 500 - delivery within 5 days (within Sverige only). Free return and 30 days open purchase.

Product information

Produktnummer: 1040201

Tanner Chukka is a classic 1-layer workboot from the Heritage Collection, with a strong Lundhags character. It has a soft 1-layer tongue and gussets to keep out snow and water. Chukka is the name for ankle boots with two or three eyelets that were popular back in the 1940s and 50s. The name Chukka comes from the sport of polo.

Features

  • 1-layer boot with a low shaft
  • Shaft made from Heinen Terracare Bergamo
  • EVA (5 mm) for cushioning and insulation
  • Full-grain leather insole
  • Lundhags Commando soles, rough textured and durable with 60 ShA
  • Waxed flat laces, 110 cm

Materials

Heinen Terracare full grain Bergamo leather, Lundhags Commando sole

Unlike certain other splendid products, Lundhags boots don’t win in being repaired, they are to be used. If you take care of your boots properly, they can last for decades.

Unlike certain other great products, Lundhags boots don’t win in being repaired, they are to be used. If you take care of your boots properly, they can last for decades.

Properly proof the boots the first three or four times you use them. After a while, you will see where you need to proof the boots to get maximum protection against wet conditions.

Use the boots as often and as much as possible, preferably at least twice per month. They will then retain their shape to your feet.

Always use two pairs of wool socks, one thinner closest to the foot (a liner) and one heavier depending on the temperature.

Clean the boots with mild water and a scrubbing brush. This works even on the inside to wash out salt and dirt from the leather.

Avoid drying the boots in a drying cupboard. They withstand drying of max 40°.

Remove the insoles and place them in the shaft after each use.

Ensure that your boots are well impregnated if you plan to not use for a while. The cellular rubber, however, should not be proofed. Lundhags Leather Grease is a perfect companion to your polished boots. For boots in nubuck, you will want to use Leather Wax from Toko, which retains the polished, suede-like surface, for the best protection against water. But you then lose the special appearance of nubuck and the nubuck can darken somewhat.

Store the boots in a cool place between hikes.

Do the shafts of the boots feel too hard? By leaving the last three pairs of holes in the shaft unlaced, you will soften up the shaft naturally during first hikes.

The easiest way to quickly find the right size is for you to put on a thin sock and measure the foot from heel to toe. Then add 15 mm and compare with the sizes in the table below.

Kunderecensioner (2)

LinaFriday, 04 Jan 2019

Vilken sko(känga)! Helt suverän och har fått så mycket komplimanger för dem. Bekväm, snygg och tålig.

Anders BackmanSunday, 20 Nov 2016

Vinter i Stockholm. Snöslask med salt, grus, is, sura stockholmare och inställda bussar. Stoppa ner fötterna i ett stycke jämtländsk stolthet. Smorda och vaxade, med rejäl sula och stilren design. Varma och sköna med kompletterande ullsula och bra strumpor. Fötterna jublar.

Ge ditt betyg och skriv en recension